2007-2018 Jeep JK all models compatible!
This powerful, yet affordable tool, allows users to recalibrate their vehicle’s computer for a variety of useful benefits.
Among those benefits are speedometer correction to compensate for tire size changes, daytime running lamp activation, engine idle speed options for improved winching performance and even reduced pressure thresholds that are TPMS (Tire Pressure Monitoring System) compatible.
Included with the ProCal Module is an easy-to-read code card that makes setting the tool a snap. Once set, the process of recalibrating the vehicle’s computer is as simple as plugging the tool into the vehicle’s OBD port and waiting for the horn to honk. The ProCal Module can then be stored in the vehicle’s glovebox until stock or new custom settings are needed. AEV’s ProCal Module is currently available for the Jeep JK Wrangler.
The AEV ProCal Module allows the user to reprogram several factory parameters including:
•Tire Size (2 modes: 24-38.75” and 39-53.75")
•Gear Ratio
•One Touch Lane Change
•Daytime Running Lamps (Low Beam, Fog Light, or Turn Signal location options)
• Low Tire Pressure Indicator
•Automatic Smart Bar (ASBS) Indicator Disable (after Smart Bar removal)
•Clear Diagnostic Trouble Codes
While the module is plugged into the OBD port, the ProCal Module can also:
• Set a Temporary Extended Idle (up to 2000 rpm)
•Provide a Dead Center Steering Wheel Indication
•Clear Diagnostic Trouble Codes (DTCs)/ Turn off the Check Engine Light
For AEV HEMI Builders Kit customers, the ProCal Module will:
•Program the vehicle VIN into the new PCM Controller
•Program the Pedal Calibration and Tolerance
The ProCal Module is only designed to be plugged into the vehicle during programming or activation of run-time features. Between uses, AEV recommends storing the ProCal unit in the glove box or console. The included Quick Reference Guide is intended to fit in your Owners Manual folder. The ProCal module will lock to a vehicle’s VIN number and may not be used on another vehicle until the “RESTORE” function is used on the original vehicle. The “RESTORE” function will reset a vehicle’s default settings to stock and unlock the module for use in another vehicle.
