Home > JEEP MODEL > JT 2018+
Sort By:
Page of 1
JL/JT Hood Scoops ONLY JL/JT Hood Scoops ONLY

Air Hood Scoops For Jeep JL Rubicon / Gladiator (Scoops ONLY)

Feed more air to your Jeep JL and Gladiator S&B Intake Kit.

  • Uses both stock Rubicon hood openings
  • Requires no major cutting or drilling
  • OEM like design matches the look of your Jeep
  • Installs in minutes with no need to remove the hood
  • Injection Molded Silicone Grill Plugs included

Overview

Feed More Air to
your Intake System

Our new Jeep Cold Air Intake Scoops feed more cool air to your intake system. More cool air equals better performance and increased power. Designed to mirror the OEM design, but also give you a more aggressive aftermarket look.


Injection molded silicone grill plugs included

If extreme weather conditions arise such as heavy snow, dust or other debris, grill plugs have been provided to prevent these elements from entering the hood scoops.



List Price: $199.00
Our Price: $199.00
Z Automotive (ZAT) Z_TZR_JLL Z Automotive (ZAT) Z_TZR_JLL

TAZER PROGRAMMER FOR WRANGLER JL / GLADIATOR

JL/JT TAZER

List Price: $219.00
Our Price: $219.00
S&B Cold Air Intake for 2018-2020 Jeep Wrangler JL / Gladiator 3.6L - 75-5121 S&B Cold Air Intake for 2018-2020 Jeep Wrangler JL / Gladiator 3.6L - 75-5121

Maximum Performance

Our cold air intake for the 2018 Jeep Wrangler JL was engineered to minimize air restriction and flows 26.18% better than stock. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out unwanted engine heat.

Premium Silicone Rubber.

The air filter, couplers, inlet, and tube seal are made from premium silicone rubber. Silcone won't crack, has exceptional tear strengh, and can handle temperatures as high as 400F. Demand Better. Demand S&B

No Check Engine Lights.

S&B devotes a huge amount of resources to engineer our intakes that allow your engine to run properly with stock calibration or enhanced tuning. The JL intake utilizes your stock air temperature sensor and featurees an aluminum CNC lathed crankcase breather connection, that ensures a perfect snap-on fitment.

OEM Fit and Finish.

Featuring a fully enclosed one piece box design. The lower box prongs integrate with the oem mounting locations to ensure a perfect fit. The Silicone Fender Seal is designed to pull air from the stock location and retains the use of the stock ram air tube.

This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.

Maximize Airflow.

The OEM intake tube is highly restrictive and flattens out toward the center of the tube. S&B's intake tube doesn't flatten out, and is designed to minimize restriction with one clean line from the throttle body to the air box. Less obstruction means more airflow, and better performance.

Large Clear Lid.

Our signature large clear lid provides great looks. Featuring a rubber lid seal to keep out power robbing engine heat.

List Price: $299.00
Our Price: $299.00
Z Automotive (ZAT) Z_TZR_JLM Z Automotive (ZAT) Z_TZR_JLM

Simple, plug-in installation – simply unplug the SGW module and plug the Tazer JL Mini in its place. Located above the OBD2 Diagnostic connector.

There are two sets of features – those that program the vehicle to accommodate modifications made to the Jeep, and “live” features..

These are all accessed using the dash display, using steering wheel buttons to navigate the menus.

Settings – once the Tazer is “married” to the Jeep, the following menus can be accessed. Unmarrying the Tazer will bring the settings back to stock.
Perf menu:
Adjust for alternate tire sizes up to 41″
Adjust for alternate axle gear ratios
Adjust for an alternate transfer case LO range ratio

TPMS menu:
Disable TPMS system if desired
Change front/rear TPMS warning PSI limit

Radio menu:
Disable Backup camera
Enable Cargo/front/undercarriage Camera input
Enable CD audio input
Disable TravelLink (weather warnings included)

Lighting Menu:
Change DRL region (type)
Change DRL location
Disable DRL Dropout
Enable Fog lamp output
Disable Fog lamp dropout
Disable Halo’s
Set LED 3rd brake light type
Set LED tail lamp type
Set LED front turn signal type
Set Trailer Tow output for use with Mopar kit

Other menu:
Disable/Enable Electronic sway bar – for axle swaps or to run disconnected at any speed or drive mode
Disable/Enable Front Axle Disconnect
Disable/Enable Front and Rear Lockers
Enable Aux switch settings on the radio
Enable Blind spot detection (sensors required)
Change cluster splash screen to Wrangler/Sahara/Rubicon
Enable/Disable PANIC button on remote

Live features:
Light shows: Can be accessed from the key fob or from the on-screen menu. 6 pre-set light shows and 3 make-your-own shows included. Set from the factory to only operate when parked, but can be unlocked for off-road, parade, and emergency personnel use.

Disable Navigation in-motion lockout – enter addresses while the vehicle is moving
Disable camera lockout – use the backup camera and/or added cargo/front/undercarriage camera at any speed for any length of time
Auto Traction Kill – can be set to turn off traction control upon start-up
Auto StopStart Disable – can be set to disable AutoStopStart upon vehicle start-up
AutoPark Disable – can override the AutoPark system
TurnCAM – can turn on backup camera whenever turn signals are used (great for when the doors are off)
0-30 and 0-60 timers
Cooldown mode – run engine fans when Jeep is off, to aid in cooldown
Winch mode – raise engine idle to 2000 RPM while winching or jumping another vehicle
Clear Check engine light

List Price: $329.00
Our Price: $329.00
KMC Wheels KM235 Grenade Crawl Series Wheel, 17X9 5X5 - Machined JT/JL/JK KMC Wheels KM235 Grenade Crawl Series Wheel, 17X9 5X5 - Machined JT/JL/JK

Brand: KMC Wheels
Backspacing: 3.5in
Bolt Pattern: 5x5
Color: Machined Silver
Offset: -38mm
Qty: 1
Size: 17x9
Mfgr. Warranty: Limited Warranty
Condition: New Product
Return Policy: Standard

List Price: $425.00
Our Price: $425.00
KMC Wheels KM235 Grenade Crawl Series Beadlock Wheel, 17x9 5x5 - Satin Black JT/JL/JK KMC Wheels KM235 Grenade Crawl Series Beadlock Wheel, 17x9 5x5 - Satin Black JT/JL/JK

Brand: KMC Wheels
Backspacing: 3.5in
Bolt Pattern: 5x5
Color: Satin Black w/Silver Lip
Offset: -38mm
Qty: 1
Size: 17x9
Mfgr. Warranty: Limited Warranty
Condition: New Product
Return Policy: Standard


List Price: $435.00
Our Price: $435.00
KM229 MACHETE CRAWL JT/JL/JK 5x5 KM229 MACHETE CRAWL JT/JL/JK 5x5

Customize the look of your Off-Road Vehicle with a set of KMC KM229 wheels. This particular wheel comes in a multi-spoke machined finish that will surely complement the look of your vehicle. These wheels are made using the highest grade materials, and are strong enough to host the high-performance off-road tire of your choice.

Here are additional specs:

• Sixe: 17X9
• Bolt Pattern: 5X127
• Offset: -38MM
• Hub Bore: 78.30MM
• Back Spacing: 3.50
• Load Capacity: 2500LBS

List Price: $448.00
Our Price: $448.00
KMC Wheels KM229 Machete Beadlock Satin Black Wheel 17x9 5X5 JT/JL/JK KMC Wheels KM229 Machete Beadlock Satin Black Wheel 17x9 5X5 JT/JL/JK

Customize the look of your Off-Road Vehicle with a set of KMC Series KM229 wheels. This particular wheel comes with a satin black center and machined lip that will surely complement the look of your vehicle. These wheels are made using the highest grade materials, and are strong enough to host the high-performance off-road tire of your choice.

Here are additional specs:

• Sixe: 17X9
• Bolt Pattern: 5X5
• Offset: -38MM
• Hub Bore: 78.30MM
• Back Spacing: 3.50
• Load Capacity: 2500LBS

List Price: $448.00
Our Price: $448.00
KMC Wheels XD Series 232 Black Beadlock Wheel, 17X9 5X5 JT/JL/JK KMC Wheels XD Series 232 Black Beadlock Wheel, 17X9 5X5 JT/JL/JK

Customize the look of your Off-Road Vehicle with a set of Robby Gordon designed XD 232 KMC wheels. These particular wheels feature a multi-spoke design that will surely complement the look of your vehicle. These wheels are made using the highest grade materials and are strong enough to host the high-performance off-road tire of your choice.

Robby Gordon is no ordinary name in the racing realm. He has raced in everything from desert racing to NASCAR to Indy car and even the Dakar Rally. He has been a successful racer in almost every discipline, but his roots remain true to off-road.

Dimensions: 17x9 5x5

Center Bore:71.5

Offset: -38

Backspacing: 3.5

List Price: $494.00
Our Price: $494.00
Jeep Gladiator DECKED system Jeep Gladiator DECKED system

DECKED systems ship freight, and shipping is FREE anywhere in the continental U.S.A. Unlimited components now ship bundled with the DECKED system for a flat rate fee of $15. Order components with your system to save on shipping. Click the SHIPPING POLICY tab for detailed information.

All DECKED Systems come with a 3-Year Limited Warranty.

Please visit the FAQ page for more answers to those tough questions!

KEY FEATURES:
  • 3-Year Warranty
  • Built from 100% recycled HDPE (High Density Polyethylene) co-molded to a galvanized recycled steel subframe
  • System payload rating: 2000 lbs evenly distributed on the deck
  • Drawer payload rating: 200 lbs per drawer
  • Two full bed-length drawers. Note: Drawers do not fully extend. See the TECHNICAL SPECS tab for details.
  • Drawers are weatherproof. System itself is impervious to moisture, extreme UV light exposure and severe temperatures
  • Oversized cast aluminum handles for ease of operation with gloves
  • Will work with a spray-in bed liner, but not a drop-in plastic bed liner
  • Will work with a BedRug mat, but not with a BedRug full liner. LEARN MORE
  • The midsize system features one full-size drawer and one narrow drawer. The full-size drawer fits regular dividers, the D-Box and the Crossbox. The Narrow drawer fits narrow dividers and the Crossbox. The midsize system is also compatible with locks, drain plugs and CoreTrax.
INTEGRATION: (DECKED is compatible with a variety of accessories including, but not limited to):
  • Top rail mounted ladder racks
  • Tonneau covers that do not require more than 3" below the bed rail for mounting or operation
INSTALLATION:

Assembly requires basic hand tools. Please follow our written instructions as well as step-by-step video tutorials.

List Price: $1,400.43
Our Price: $1,400.43
Sale Price: $1,149.99
Savings: $250.44