Home > JK
Sort By:
Page of 37
ARB Air Locker, Dana 30

Precision Gear had its beginning over 25 years ago developing specialty application ring and pinion gear sets for race cars and off road vehicles. By continually applying the same performance criteria to each new product, Precision Gear has steadily grown and now offers the industry's largest selection of specialty gears. We also have a full line of high performance gears sets, bearing kits and locking differentials.

Product price is not filled in. This product cannot be purchased.

List Price: $1,884.99
SPIDERWEBSHADE SpiderBalls (Long)

If your SpiderBalls are growing old and worn, you can now replace them very simply. We are offering replacement SpiderBalls for the very low price of $1. Order them today on PayPal to make your SPIDERWEBSHADE look brand new!

Note: To order more than one SpiderBall, adjust the quantity ordered while you are on the PayPal checkout page.

Our Price: $1.00
Rock Krawler Jam Nut 3/4 Bore 16 TPI Right Hand Thread

Jam Nut 3/4 Bore 16 TPI Right Hand Thread. Rock Krawler Suspension's service parts are a direct replacement for your existing hardware. Please measure carefully to ensure proper fitment.

  • 1-1/8 Inch head width
  • Corrosion resistant zinc coating
  • 3/4 Inch bore
  • 16 TPI
  • Right hand thread
  • Universal fitment
  • Sold individually
  • Made in the USA

List Price: $1.39
Our Price: $1.32
Savings: $0.07
Rock Krawler Jam Nut 7/8 Bore 14 TPI Right Hand Thread

Jam Nut 7/8 Bore 14 TPI Right Hand Thread. Rock Krawler Suspension's service parts are a direct replacement for your existing hardware. Please measure carefully to ensure proper fitment.

  • 1-5/16 Inch head width
  • Corrosion resistant zinc coating
  • 7/8 Inch bore
  • 14 TPI
  • Right hand thread
  • Universal fitment
  • Sold individually
  • Made in the USA

List Price: $1.39
Our Price: $1.32
Savings: $0.07
Teraflex Jeep JK Hitch Pin for Quick Disconnects

Stainless Steel Pin used on the TeraFlex Sway Bar Quick Disconnect System.

List Price: $1.99
Our Price: $1.89
Savings: $0.10
Rock Krawler Jam Nut 1 Bore 14 TPI Right Hand Thread

Jam Nut 1 Bore 14 TPI Right Hand Thread Rock Krawler Suspension's service parts are a direct replacement for your existing hardware. Please measure carefully to ensure proper fitment.

  • 1-1/2 Inch head width
  • Corrosion resistant zinc coating
  • 1 Inch bore
  • 14 TPI
  • Right hand thread
  • Universal fitment
  • Sold individually
  • Made in the USA

List Price: $2.09
Our Price: $1.99
Savings: $0.10
Synergy Suspension JK Sway Bar End Link Bushing


  • Synergy Suspension JK Sway Bar End Link Bushing (Replacement for 8059 / 8060)
  • High quality rubber bushing, designed to use a separate internal sleeve
  • 1.50" mounting width

Our Price: $3.00
Synergy Suspension OEM Style Dodge Sway Bar Bushing

  • Synergy Suspension OEM Style Dodge Sway Bar Bushing (Replacement for 8515)
  • High quality rubber bushing with bonded internal metal sleeve
  • 1.50" mounting width, 1/2" sleeve ID

Our Price: $4.00
TeraFlex Teraflex Jeep JK Bracket for Quick Disconnect

This is the small bracket used on the frame to attach your sway bar link when the sway bar is disconnected.
Fits 2007+ Wranglers Left and Or Right applications.

----Requires 2 per Jeep----

List Price: $4.99
Our Price: $4.74
Savings: $0.25
Rock Krawler Jam Nut 3/4 Bore 16 TPI Left Hand Thread

Jam Nut 3/4 Bore 16 TPI Left Hand Thread. Rock Krawler Suspension's service parts are a direct replacement for your existing hardware. Please measure carefully to ensure proper fitment.

  • 1-1/8 Inch head width
  • Corrosion resistant zinc coating
  • 3/4 Inch bore
  • 16 TPI
  • Left hand thread
  • Universal fitment
  • Sold individually
  • Made in the USA

List Price: $4.99
Our Price: $4.74
Savings: $0.25
Rock Krawler Jam Nut 7/8 Bore 14 TPI Left Hand Thread

Jam Nut 7/8 Bore 14 TPI Left Hand Thread. Rock Krawler Suspension's service parts are a direct replacement for your existing hardware. Please measure carefully to ensure proper fitment.

  • 1-5/16 Inch head width
  • Corrosion resistant zinc coating
  • 7/8 Inch bore
  • 14 TPI
  • Left hand thread
  • Universal fitment
  • Sold individually
  • Made in the USA

List Price: $4.99
Our Price: $4.74
Savings: $0.25
Rock Hard 4x4 "Rock Dome" Tapered Bolt Head Protecter for Oil Pan Skid Plate Drain Access - Small

Rock Hard 4x4 is very proud to offer the original off road duty tapered bolt head protector for RH4x4 skid plate systems.

Replace those damaged or missing tapered bolt head protectors! This is our original 1.5" OD bolt head protector for our Jeep Wrangler JK 2/4DR 2007 - 2015 Oil Pan skid plate systems. This tapered bolt head protector shields the bolt head securing your access door. This is not the tapered bolt head protector at the rear of your skid plate. This access door is a new feature on all current Rock Hard 4x4 Oil Pan / Transmission Skid Plates.
Each tapered bolt head protector, or "Rock Dome", is individually cut from cold rolled steel then machined into shape. After production its quality control checked for precise measurement and powder coated for protection against years of abuse.

Dimensions
Outer Diameter: 1.5"'
Recessed Hole: 0.93"
Bolt Hole: 0.385"

Our Price: $5.95
Rock Hard 4x4 "Rock Dome" Tapered Bolt Head Protecter for Skid Plate Systems - Large

Rock Hard 4x4 is very proud to offer the original off road duty tapered bolt head protector for RH4x4 skid plate systems.

Replace those damaged or missing tapered bolt head protectors! This is our original 2.5" OD bolt head protector for our Jeep Wrangler JK 2/4DR 2007 - 2015 Oil Pan, Transfer Case, and Fuel Tank skid plate systems.

Each tapered bolt head protector, or "Rock Dome", is individually cut from cold rolled steel then machined into shape. After production its quality control checked for precise measurement and powder coated for protection against years of abuse.

Unique Design
Proven by the most hardcore Jeep JK drivers on trails like the Rubicon, Moab, Rausch Creek and more, our skid plate system's design is the key to it's popularity.
Without our Rock Domes installed your bolt heads are left exposed and run the risk of damage or even shearing off. Let our Rock Domes be your skid plate punching bags and take the pounding.

Dimensions
Outer Diameter: 2.5"'
Height: 0.5"
Recessed Hole: 1.10"
Bolt Hole: 0.5"

Our Price: $7.95
Rock Krawler Jam Nut 1 Bore 14 TPI Left Hand Thread

Jam Nut 1 Bore 14 TPI Left Hand Thread Rock Krawler Suspension's service parts are a direct replacement for your existing hardware. Please measure carefully to ensure proper fitment.

  • 1-1/2 Inch head width
  • Corrosion resistant zinc coating
  • 1 Inch bore
  • 14 TPI
  • Left hand thread
  • Universal fitment
  • Sold individually
  • Made in the USA

List Price: $8.99
Our Price: $8.53
Savings: $0.46
Synergy Suspension GM 1 Ton TRE Adapter

  • Synergy Suspension Steering Correction Kit (PPM-8011) requires the drag link to be flipped to the top of the steering knuckle for increased ground clearance and to correct steering geometry on lifted Jeep JKs
  • Adapter is designed to flip the taper on the steering knuckle
  • Eliminates the need for reaming the knuckle to the correct taper
    - Drill the existing taper with a 13/16" drill bit for installation and use (8001-02-01)
    - If the hole is already drilled with a 7/8" drill bit use (8001-03-01)
  • CNC machined from 303 stainless steel
  • Sold Individually
Options:
  • JK Drag Link Flip Adapter 13/16" Drill Bit
  • High Speed Steel 13/16" to 1/2" Shank Drill Bit
  • Used for drilling out JK knuckles to the install PPM-8001-02-01 Drag Link Flip Adapter
Part #Description
PPM-8001-02-01Jeep JK 1 Ton TRE Flip Adapter for 13/16" Hole
PPM-8001-03-01Jeep JK 1 Ton TRE Flip Adapter for 7/8" Hole

Our Price: $10.00
Synergy Suspension Jeep Heavy Duty Front Ball Joint Replacement Boots

Synergy Suspension Jeep Heavy Duty Front Ball Joint Replacement Boots

Replacement Boots for:

  • Fits Upper Ball Joint or Lower Ball Joint
  • Sold in pairs

Our Price: $10.00
Teraflex Jeep JK Quick Disconnect Stud JK Upper 5/8" Diameter

Quick Disconnect Stud JK Upper 5/8" Diameter

List Price: $10.99
Our Price: $10.44
Savings: $0.55
Synergy Suspension Sealed Sway Bar Link Tie Rod End

  • Synergy Suspension Sealed Sway Bar Link Tie Rod End (Replacement for 8059 / 8060 / 8515)
  • Clear Zinc Plated for maximum corrosion resistance
  • 1/2-20 UNF thread
  • Made from forged 1040 steel, not cast

Our Price: $12.00
Synergy Suspension Jeep JK Front D30/44 Inner Axle Seals

Factory Replacement Inner Axle Seals for the Jeep JK Front D30/44 Axle Housing

Kit Includes:

Our Price: $12.00
Teraflex Jeep JK Quick Disconnect Stud Diameter 3/4" Lower

Quick Disconnect Stud JK 3/4 Diameter QD4

List Price: $12.99
Our Price: $12.34
Savings: $0.65
Rock Hard Clevis

Rock Hard 4x4 is very proud to offer the easiest to use recovery shackle for your off road vehicle.

NOTE - THIS RECOVERY SHACKLE AND PIN ARE NOT A ROCK HARD 4X4 MANUFACTURED PRODUCT

Don't go off road without the right gear! A recovery shackle is the safety accessory no bumper should be without. The clevis and pin work seamlessly together to give you a safe pull point for a winch hook or tow strap. Simply thread the pin into the clevis through your RH4x4 bumper's recovery tab (included on all front and rear RH4x4 bumpers) and you've got a Rock Hard recovery point!

The pin has a weather resistant finish to prevent rust and damage caused by UV rays and weather changes. Each pin is inspected prior to shipment to ensure it threads easily into it's paired clevis. Add this to your pack list before each trip and you're set!

What comes in every kit:
  • Clevis with Pin
  • Installation Instructions (just kidding - it's a no brainer)
Three Reasons Why:
  • Extreme Duty Clevis
  • Installs in Seconds
  • Weather Resistant

Our Price: $14.95
Synergy Suspension Jeep JK Cam Bolt Eliminator Kit

  • Designed to take place of cam bolts used on stock control arm mounts
  • Desirable for users who are removing cam bolts and upgrading to adjustable control arms
  • Laser cut 3/16" high strength steel
  • Zinc plated for maximum corrosion resistance
  • Includes 4 washers
Front Lower Control Arm Mount with cam bolt tabs removed. Washer covers slot for upgrading to adjustable control arms

Our Price: $15.00
TeraFlex JK Stock Brake Light Extension Bracket Kit

The TeraFlex JK stock brake light extension kit allows you to retain the factory brake light. Simply cut the factory bracket, and bolt on the extension piece. Cutting of the factory brake light bracket is required.

Specifications

Weight 3.0 lbs
Vehicle TypeJK Wrangler, JKU Wrangler Unlimited
VideoNo
Attachments 999020 (Instructions for JK Stock Brake Light Extension).pdf

List Price: $15.99
Our Price: $15.19
Savings: $0.80
Rugged Ridge Hood Lock Kit, 07-15 JK

Special design virtually disappears into the grille. Cam lock design keeps people out of the engine compartment of your Jeep. These clever applications install in minutes. An upgraded internal lock cover keeps ice and debris from fouling the lock mechanism.

List Price: $25.99
Our Price: $17.99
Savings: $8.00
JCR Offroad LED Brake 2" Light Flush Mount

This 2" flush mounted LED will mount right into our Tire Carrier mounting plates, giving you a third brake light! You will need to remove any center caps and it can not be used with tire mounted license plate mounts.

List Price: $20.43
Our Price: $18.39
Savings: $2.04
Rugged Ridge CB Radio Mount, 07-15 JK

Are you looking to install a CB radio in your Jeep JK Wrangler in an accessible area? The Rugged Ridge CB radio mount offers you this easy to install solution. The CB radio mount conveniently mounts over the rearview mirror for an easy reach. Made from durable black powder coated steel, now your CB is attached high and within reach without having to take your eyes off the road or trail. Minor drilling required for 07-10 JK Wrangler, no drilling required for 11-up JK Wrangler.

List Price: $26.99
Our Price: $18.99
Savings: $8.00
Rock Krawler Front Coil Spring Clips 07-Present Wrangler JK/JK Unlimited

Front Coil Spring Clips 07-Present Wrangler JK/JK Unlimited. Our front spring retainer clips hold the bottom of your front coil spring in place:
Retains the front coil springs during off-road use
Includes:

  • (2) Front spring clips,
  • Hardware, and instruction.

List Price: $20.00
Our Price: $19.00
Savings: $1.00
Rock Hard 4x4 Oil Pan Skid/Exhaust Crossover Shim Plate for Jeep Wrangler JK 2/4DR 2007 - 2015

Rock Hard 4x4 is very proud to offer an additional Shim Plate for the Jeep Wrangler JK 2/4DR 2007 - 2015 with a RH4x4 Oil Pan/Transmission Skid Plate.

NOTE: All Rock Hard 4x4 Jeep Wrangler JK Oil Pan/Transmission Skid Plates include a shim. This is an ADDITIONAL skid plate you can purchase if you have modified exhaust at your crossover pipe.This is not needed on all applications. A breakdown of suspension systems is not available due to variances in models. This shim plate can be added at anytime after Oil Pan/Transmission Skid Plate install.

If you've added a custom exhaust system to your Jeep Wrangler JK then you may have changed your crossover pipe clearance. Our Oil Pan/Transmission skid plate is designed for factory exhaust systems and any change in tolerance may cause unwanted vibration or noise. Prevent that by adding our shim plate! Some aftermarket suspension systems require an exhaust spacer be installed which invariably moves your exhaust crossover pipe down. Don't wheel unprotected simply because your exhaust has been modified - keep your Rock Hard 4x4 Oil Pan/Transmission skid plate installed and wheel with confidence!

Our 3/16" thick skid plate shim is laser cut and powder coated. Designed to fit both the 2007-2011 3.8L and 2012-2015 3.6L engines plus transmission and dual cat system.

Fits the Following Rock Hard 4x4 Oil Pan/Transmission Skid Plates:
RH-6000-LA
RH-6003
RH-6040
RH-6043

Our Price: $19.95
Synergy Suspension Jeep JK Rear Stem Mount Fox Shock Adapter

  • Synergy Suspension Jeep JK Rear Shock Adapter
  • Developed to run Fox 2.5" JK rear shocks (FOX-982-02-796 & FOX-980-02-396-A) in the factory mounts
  • Clear zinc finish for maximum corrosion resistance
  • Sold in Pairs

Our Price: $20.00
Synergy Suspension Jeep JK Front & Rear Coil Spring Spacers

Synergy Suspension Jeep JK Front & Rear Coil Spring Spacers

  • Coil spring spacers are available in 3/4" and 1 3/4" sizes
  • Manufactured from high density polyurethane
  • Spacers maintain factory ride quality
  • Spacers install on top of the stock spring
  • Coil spring spacers are only available in black
  • Installation is easy, requiring no welding or drilling
  • Spacers are available as complete kits (front & rear)
  • Sold in pairs
Part #LiftDescriptionTire Size
PPM-8017-0750.750"Front Coil Spring Spacer
32"
PPM-8016-0750.750"Rear Coil Spring Spacer32"
PPM-8017-1751.750"Front Coil Spring Spacer33"
PPM-8016-1751.750"Rear Coil Spring Spacer33"

Proper Installation Requires:

Our Price: $20.00